Application
The DTI-RJ (Indoor Termination Device) is the first device on the copper line at the customer's. It splits and defines the demarcation between the incumbent's local loop and the customer's indoor network. It sets a clear limit of responsibility between the two parties.
The DTI-RJ is compatible with all the present systems (POTS, RNIS, xDSL).
By inserting a RJ45 plug, it deconnects the indoor network at the customer's side and tests the local loop. It also allows the customer to check the presence of the dial tone. This action can locate any default at the operator's side or the customer's side.
Description
The DTI-RJ is equipped with a RJ45 female socket.
It allows the connection with IDC's (Insulation Displacement Contact) of:
- 1 input drop cable pair,
- 3 output pairs for indoor equipments (marked 1, 2 and T (Test)
The DTI-RJ is composed of a cover and a base plate supporting a pivoting termination plate. The casing contains a tool to make some IDC terminations. For repeated terminations, it is recommanded to use the OSA3 termination tool (to be ordered separately).
It can be fitted with a RC module (defined place).
Dimensions 75x75mm
Height 35mm
Wall or DIN 35mm mounting.
|
